|
|
|
|
|
|
It is currently Fri May 24, 2013 10:23 am
|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 5 posts ] |
|
Qualcast 43S only runs on full choke
| Author |
Message |
|
nudge33
KG Newbie
Joined: Sun Apr 01, 2012 6:49 pm Posts: 3
|
 Qualcast 43S only runs on full choke
Hello everyone,
I'm new to this forum so hope someone can help.
I have a problem which has been discussed before, I have read the previous posts but I am still having problems, here goes...
PROBLEM My Qualcast 43S only runs on full choke, as soon I adjust to half or no choke, the engine stops.
SYMPTOMS It's running very rich, black soot all over plug. Drinking petrol!
TRIED SO FAR Adjusting the main jet to 1 3/4 turns out. Cleaned carb. New air filter. Removed head and de-coked.
Help! it's such a simple engine and set-up I'm at a bit off a loss now!
Thanks in anticipation.
Nigel.
|
| Fri Apr 06, 2012 11:42 am |
|
 |
|
Kleftiwallah
KG Regular
Joined: Thu Jan 22, 2009 7:17 pm Posts: 245 Location: North Wiltshire
|
 Re: Qualcast 43S only runs on full choke
Not being familiar with this engine. . . .
can you reset the valve timing?
Is there a slow tickover jet hidden away in the carb ?
After that I'm stumped. Cheers, Tony.
|
| Fri Apr 06, 2012 11:56 am |
|
 |
|
nudge33
KG Newbie
Joined: Sun Apr 01, 2012 6:49 pm Posts: 3
|
 Re: Qualcast 43S only runs on full choke
Tony, Thanks. Not sure about valve timing or hidden idle jet, I'll have a look Cheers. Kleftiwallah wrote: Not being familiar with this engine. . . .
can you reset the valve timing?
Is there a slow tickover jet hidden away in the carb ?
After that I'm stumped. Cheers, Tony.
|
| Fri Apr 06, 2012 3:38 pm |
|
 |
|
Cider Boys
KG Regular
Joined: Sun Mar 05, 2006 7:03 pm Posts: 661 Location: Somerset
|
 Re: Qualcast 43S only runs on full choke
I have not read the previous posts that you mention, however I'm sure an expert like Clive may be able to help you.
Start with the simple things first, such as, if it only runs on full choke when hot then I'd look at the throttle spindle and gaskets to see if air is being drawn in. Just run it and pour some oil around any sources of air intake and listen for a change in running note of engine.
Best of luck
Barney
|
| Sat Apr 07, 2012 11:08 am |
|
 |
|
nudge33
KG Newbie
Joined: Sun Apr 01, 2012 6:49 pm Posts: 3
|
 Re: Qualcast 43S only runs on full choke
Barney,
Thanks for that, I'll have a go.
Cheers.
Nigel.
|
| Sat Apr 07, 2012 2:05 pm |
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|